- Remove the Wheel
- Remove your 2 OEM silver factory bolts holding the caliper to the forks, set aside you will not be reusing these
- The New Bracket includes 4 new bolts, 2 with flanges and 2 without.
- The 2 bolts without flanges (low profile heads) will come from the inside of the fork leg and thread into the ne caliper bracket
- The 2 bolts with the flanges will pass thru holes that has the post welded to the bracket which are located at the rear of the bracket and thread into the OEM caliper.
- Make sure to apply red thread lock to the threads of each bolt
Products
